Tungsten Foils Exporter | Tungsten Sheets, Foils Exporter | Tungsten Sheets Plates Supplier in India
Tungsten factory products accessible from Nextgen Steel & Alloys incorporate plate, sheet & foil with numerous choices on width, length and thickness. Pure Tungsten level moved products are manufactured from squeezed and sintered powder metallurgy ingot and are moved to an extensive variety of plate, sheet, and thwart thicknesses.
Flat rolled products
Pure Tungsten level moved products are manufactured from squeezed and sintered powder metallurgy ingot and are moved to an extensive variety of plate, sheet, and foil thicknesses.
The material is 99.95% Pure Tungsten sheet and is typically supplied as-came in thicknesses underneath 0.030", and anxiety calmed at that thickness or more. Plate will be sheared, grating cut, band saw cut, or water plane slice to the resistances appeared.
Tungsten plate is ordinarily supplied with a uniform matte complete, perfect and free from remote matter. Significant surface imperfections will be evacuated by pounding gave that such molding does not lessen measurements beneath determined points of confinement.
Thickness Tolerance of Plates
(% of Thickness)
.1875 to .625
Over .500 to 1.125
*For thickness 0.040 to 0.187 inches; sheet will be sheared, grating cut, band saw cut, or water jet cut to the resistances appeared.
Bedsheet is sold as a useable width, in this manner any breaks or delaminations on the edges are worthy the length of a 6, 12 or 24 inch least width can be yielded from the material.
Thickness Tolerance of Sheets
Up to 12 Inches wide (Inches)
Over 12 thru 24 Inches wide (Inches)
0.005 to 0.008
Over 0.008 to 0.011
Over 0.011 to 0.015
Over 0.015 to 0.020
Over 0.020 to 0.040
Over 0.040 to 0.187
± 5 %
± 5 %
For determined lengths, the resistance for all sizes is + .0625 - 0 inch for each foot of length. Edge Straightness-Maximum camber is .0625 inch for every foot of length.
The aggregate deviation from levelness won't surpass 4 % greatest.