Nextgen Steel And Alloys Is A Leading Aluminium Alloy 5052 Plates Sheets Manufacturer.

ALUMINIUM ALLOY 5052 PLATES


Aluminium Alloy UNS A95052 Sheets & Plates Supplier |Aluminium Alloy 5052 Plates Manufacturers | Aluminium 5052 Sheets & Plates Manufacturer


Aluminium Alloy 5052 Plates Supplier | Aluminium Alloy 5052 Uns A95052 Plates Coils Foils Manufacturer | 5052 Aluminium Alloy Sheets Supplier

Nextgen Steel and Alloys are manufacturer of extensive range 5052 Aluminium Alloy Sheets & Plates and we also provide our customer with most satisfiable value list for 5052 Aluminium Alloy Sheets & Plates.


Aluminium alloy 5052 Sheets & Plates in H32 temper has very good corrosion resistance to seawater ,marine and industrial atmosphere. We supply 5052 Aluminium Alloy Sheets & Plates and are capable of fulfilling your required lengths and widths. It is characterize by medium to high strength alloy with a strength slightly higher than 5251.


Aluminium Alloy UNS A95052 Sheets & Plates Exporter in India, Uns A95052 Plates Coils Foils Manufacturer,5052 Aluminium Alloy Sheets Supplier


We are Manufacturer and Supplier of the most subjective scope of 5052 Aluminium Alloy Sheets & Plates. 5052 Aluminium Alloy Sheets & Plates has a range of useful properties like Decorative Finish, Non-Slip, Hard Wearing, Low Maintenance and Corrosion Resistant


5052 Aluminium Alloy Sheets & Plates is easy to form, stamp, weld and finish. If we have a proper setup,then it requires fair machinability. 5052 Aluminium Alloy Sheets & Plates is highly used for products that require high strength in corrosive environments.


To meet the quality cognizant necessities for our significantly regarded customers, we offer 5052 Aluminium Alloy Sheets & Plates in various sizes, thickness, principles and shapes according to changed prerequisites given by our customers.


Aluminium Alloy 5052 Sheets & Plates
SPECIFICATION OF 5052 Aluminium Alloy Sheets & Plates
Grade Aluminium Alloy 5052
Width Range 900-1500 mm
Standard Trimmed 915, 1220, 1400 and 1500 mm
Standard Untrimmed 1270, 1540 mm
Thickness 25-200 mm for 5xxx
Weight Depends on dimensions
Temper O, H1, H2, H3, H4, T4, T6
Finish Depends on dimensions (Mill Finish)

CHEMICAL PROPERTIES OF 5052 Aluminium Alloy Sheets & Plates
GRADE Si Fe Cu Mn Mg Cr Zn Ti Al
5052 0.50 0.50 3.8/4.9 0.30/0.9 1.2/1.8 0.10 0.25 0.15 Balance

PHYSICAL PROPERTIES OF 5052 Aluminium Alloy Sheets & Plates
Physical PropertyValue
Density 2.62 g/cc
Ultimate Tensile Strength 64-57 Ksi
Tensile Yield Strength 42-41 Ksi
Elongation 12-4 %

MECHANICAL PROPERTIES OF 5052 Aluminium Alloy Sheets
Mechanical PropertyValue
Hardness, Brinell 47
Specific Heat 0.88 J/g-°C
Poisson's Ratio 0.33
Melting Point 607 - 649 °C
Electrical Resistivity 4.99e-006 ohm-cm
Modulus of Elasticity 70.3 GPa

FEATURES OF 5052 Aluminium Alloy Sheets & Plates
  • Good Corrosion Resistance
  • Good Cold Formability
  • Good Weldability
  • High Strength

APPLICATION OF 5052 Aluminium Alloy Sheets & Plates
  • Tread Plate
  • Boiler Making
  • Containers Name plates
  • Architectural Paneling
  • Chemical Industry
  • Desalination Units
  • Pressure Vessels
  • Welded Tubes

OUR SUMMARY:
Reviewer :
Nextgen Steel & Alloys
Review Date :
Reviewed Product :
Aluminium Alloy 5052 Sheets & Plates
Author Rating
5 star1 star2 star3 star4 star5

Our Products



Enquire Now


Thank You. Your Message has been Submitted

Copyright © 2016 Nextgen Steel & Alloys || Website Developed & SEO By Nuwebwave Technologies Pvt. Ltd